⚡ Fast dispatch from UK stock
💷 Trade accounts available
💬 EV, solar & heating specialists
Browsing
LAMPS LAMPS Renewables LAMPS FM London

SolaX X3-Ultra 15.0kW Three-Phase Hybrid Inverter

The SolaX X3-Ultra 15K is a premium hybrid inverter designed for commercial and industrial sites where energy independence, battery integration, and grid resilience are essential. This 15kW model brings together intelligent controls, high-efficiency solar conversion, and a robust EPS system – all engineered to deliver around-the-clock reliability in real-world installations.

High-Capacity, Triple MPPT PV Input

With three independent MPPTs supporting two strings each, the X3-Ultra 15K allows for versatile array layouts and effective partial shading mitigation. Each tracker supports:

  • 36A input current and 45A short circuit rating – ideal for modern high-output PV modules.
  • MPPT voltage range: 160–950V with a 1000V max input – offering broad compatibility with system sizes up to 30kW.
  • 200% PV oversizing: Optimised to accept arrays up to 30kW on a 15kW output inverter, boosting generation in low-light conditions.

Advanced Hybrid Storage with Dual Battery Ports

This model supports two independent battery banks (lithium-ion, 120–800V), allowing flexible energy storage expansion. Key features include:

  • 60A charge/discharge rate: Each battery port enables high throughput for fast cycling and response.
  • Independent battery control: Allows future retrofitting or scaling of capacity without replacing the inverter.
  • Smart scheduling: Supports 7x24h load management across all sources, with user-defined grid interaction settings.

Powerful Emergency Backup (EPS) Capabilities

In the event of grid failure, the X3-Ultra 15K delivers:

  • Switch-over in <10ms – seamless backup ensures no interruption for connected loads.
  • EPS peak output: Delivers up to 30kW (200% of rated output) for 10 seconds – critical for motor starts and load spikes.
  • Half-wave load support: Operates even with challenging or inductive loads.
  • EPS usable without battery: Inverter can support loads directly from PV during daylight hours in EPS mode.

Grid-Ready, Microgrid Compatible & AI-Controlled

Built for the smart grid era, the X3-Ultra series enables sophisticated energy routing and connectivity:

  • AI Energy Forecasting: Predicts solar production and consumption trends to enhance efficiency.
  • Virtual Power Plant (VPP) Ready: Compatible with aggregators and cloud-based dispatch systems via SolaX Cloud.
  • Wireless metering support: Enables simplified installation and remote diagnostics.
  • Supports generator integration: Ideal for off-grid hybrid or backup-augmented solar systems.

Robust Safety & Protection Features

The unit is engineered for maximum resilience and grid compliance, featuring:

  • IP66-rated enclosure: Withstands dust and heavy rain for outdoor installation.
  • Type II surge protection: Installed on both AC and DC circuits to guard against grid spikes.
  • Full protection suite: Includes AFCI (optional), insulation monitoring, DC polarity reversal, AC overcurrent/overvoltage, and thermal protection.
  • Low night-time consumption: <10W standby load keeps operating costs minimal.

Why Evergy Recommends This Product

  • Commercial-Ready Performance: Designed for mid-scale hybrid PV systems with demanding load requirements.
  • Unmatched Backup Reliability: Near-instant switchover, 200% peak EPS power, and resilience against wave distortions.
  • Smart Grid Future-Proofing: Equipped for VPP, microgrid use, AI-based control, and scalable battery design.
  • Durable & Compliant: Certified for UK and European grid codes, including G99, EN50549, and VDE4105.

Technical Specifications Highlights

  • Rated Output Power: 15kW
  • Max PV Input: 30kW (200%) / 1000V DC max / 3 MPPTs
  • Battery Range: 120–800V (Li-ion), 60A bi-directional
  • EPS Output: 30kW peak for 10s / <10ms transfer
  • Efficiency: Max 98%, MPPT 99.9%
  • Protection Rating: IP66
  • Dimensions: 696 × 526 × 240 mm
  • Weight: 47 kg

Explore the X3-Ultra Family

Delivery & Installation Support

This model qualifies for free UK shipping. For full hybrid setups, we strongly recommend using an MCS-certified commercial solar installer. Contact us to discuss sizing, battery pairings, and delivery lead times.

Products specifications

Attribute name Attribute value
Max Input DC Power 40,000W
IP Rating IP54
Rated Power 3.68 kW
Battery Compatibility ECS2900, ECS4100, ECS4300, ECS4800
MPPT Quantity 2
DC Start-up Voltage 75 V
Backup Capability EPS with <10ms switch time
Max Charge/Discharge Current 60A